E-mail : [email protected] +86 18736021765

Hemp drying machine
  • Hemp drying machine
  • Hemp drying machine

Hemp drying machine

  • application:Hemp drying machine mainly used to dry hemp flowers,leaves,stems,seeds,etc..
  • heat source:Coal,wood chips,natural gas,diesel,propane,electricity etc.
  • Product Information
  • Technical Specifications
  • Inquiry

Guoxin hemp drying machine has a dedicated temperature control system for drying,So it can fully meet the low temperature drying requirements of hemp.Our hemp drying machine is very popular in the US, Canada, and Europe,etc..

The purpose:extract hemp oil,CBD,etc..

Hemp drying requirements:

Input moisture:80-85%
Out put moisture:8-10%
The drying temperature:30-40℃
The fuel:Natural gas,diesel,coal,electricity,steam,etc..

Features of Hemp Drying Machine:

  • 1.Fully automatic continuous feeding and discharging to meet large-scale production needs.
  • 2.Drying Temperature and operating speed can be precisely controlled.
  • 3.The movable door design is convenient for cleaning and observing the drying effect.
  • 4.Dehumidify quickly,High production efficiency and good drying effect.

The hemp drying machine include:Average material institutions,Feeding Conveyor,Discharging Conveyor,Electronic control system,Dryer host,Enter the wind system,Heat source.

The dryer observation door material:stainless steel,stoving varnish material,color steel tile material and polyurethane insulation board material,users can choose according to their own needs.

Working Principle:

Hemp flower and hemp leaves are transported by the feeding conveyor to the inside of the dryer. The material passes from the first layer to the last layer via the conveyor belt, and the dried material is conveyed by the discharge conveyor. The hemp drying machine is using hot air as the drying medium. The hot air passes through the material from the bottom to top. The final moisture comes out of the top of the hemp dryer. The drying machine not only rely on heat to dry, but also through the strong air.So it can increase the drying efficiency and reduce the drying time.

Model(Width*Length) GX1.5-6-4 GX2-8-4 GX2-9-4 GX2-10-4 GX2-12-4
Layers 4
Drying area(㎡) 29 45 51 57 69
Spread thickness of material(mm) 50-200
Working temperature(℃) 0-120
Drying time(hour) 0.1-5
Capacity(t/h) 100-150kg/h 200kg/h 250kg/h 300kg/h 400kg/h
heat exchange furnace(M) 3.2*1*2.7 3.9*1.26*3 3.9*1.26*3 4.7*1.5*3 4.7*1.5*3
Induced draft fan(kw) 11 15 15 22 22
Exhaust fan(kw) 1.5 2.2
Feeding conveyor(kw)     1.5             2.2     2.2     2.2      3
Discharge conveyor(kw) 0.55
Total power(kw) 14.55 19.25 19.95 26.95 27.75
LP gas consumption (90 degree fanrenheit) 20m³/H 25m³/H 28m³/H 30m³/H 36m³/h
Electricity consumption 25kwh 30kwh 35kwh 40kwh 45kwh
Place requirement (W*L*H)M 4.5*14*2.7 5*19*2.8 4.5*20*2.8 5.5*21*2.8 5.5*23*2.8

Send message to this supplier

  • * Your Email :
  • Your tel :
  • Your name :
  • * Your inquiry :