Construction Waste Management Line Installation Site In Sanya

Congratulations to Guoxin equipment successfully arrived at the site and began to install.

With the acceleration of urbanization, the generation and emission of urban construction waste are also growing rapidly. Construction waste accounts for a large proportion, accounting for about 30-40% of the total waste. Therefore, how to deal with and utilize more and more construction waste has become an important issue faced by government departments and construction waste disposal units at all levels.

Guoxin is a professional manufacturer in the construction waste management industry. The construction waste management equipment had been exported to many countries. The contruction waste management machine solves the problem of construction waste screening. Construction waste screening machine, including base, screening machine body, vibration damping spring, screen, discharge port, vibration motor and vibration motor bearing plate. The screening machine body is installed obliquely on the base through the vibration damping spring. Screen meshes are set up and down on the screening machine body. The vibration motor bearing plate is set horizontally in the middle of the screening machine body. The vibration motor is located on the vibration motor bearing plate; , the lower part is equipped with a cylinder to match the vibration damping spring; the upper screen corresponds to the high point of the screen, and the machine body of the screening machine is provided with an outward inclined inclined plate. A stronger vibration effect can be obtained, thereby reducing the power usage of the vibration motor, realizing energy saving and emission reduction, and reducing energy consumption.



The Construction Waste Management Line produced by Guoxin are flexible, fully automated, environmentally friendly, and stable in characteristics. The purpose of its design concept is to stand in the customer's position, and take the removal of the crushing site, the natural environment, and the complicated basic configuration to bring obstacles to the customer's crushing operation as the main solution. With the new concept of material close processing, it truly provides customers with simple, high-speed, low-cost engineering operation hardware equipment. The whole process is controlled by machines and equipment without manual service, saving time and effort.