Waste sorting equipment is a systematic operation. Waste management process is also a production line composed of multiple equipment. Each processing link in the production line has its own corresponding responsibilities, but each link is closely related. Connected and interlocked, no errors can occur at each stage, because a slight difference will affect the production of the entire production line. Therefore, the inspection work before the equipment is started up and running is essential. So what preparations need to be done before turning on the device?
Preparations for domestic waste sorting equipment before use: check and remove any debris that affects the movement of the body, such as materials in the body and between the chute; carefully check whether all fasteners are fastened; check the protective devices and find that there are Abnormal conditions should be eliminated in a timely manner. When the equipment is started: check that the operation of the transmission part of the equipment is normal before starting; the trommel screen in the domestic waste sorting equipment can only be started under zero-load conditions, and the equipment should be stopped immediately if abnormal conditions are found after starting. , and it can be restarted only after the abnormal situation has been identified and eliminated.
The comprehensive treatment technology of domestic waste is the core key to achieve the harmlessness, reduction and recycling of waste resources. Its main purpose lies in the composition of different types, sizes and specific gravity components in waste After sorting, screening and crushing treatment, the garbage can be effectively separated and screened, and then the garbage with higher calorific value is incinerated, the organic substance is biochemically treated, and the recyclable garbage is recycled and reused. , which cannot be reclaimed by landfill treatment.
The entire production line of domestic waste sorting equipment is mechanized to improve operation speed and production efficiency and reduce labor load. The whole process of mechanized operation of domestic waste sorting equipment debugging and production, processing and reuse, through automatic production to adjust the progress and parameters of each stage, not only reduces the load of labor, but also improves production efficiency and ensures safe production.
The domestic waste enters the fixed silo, and is evenly discharged through the bottom of the silo to the manual sorting platform. The manual sorting platform can be set to 2-4 manual sorting stations. The manual sorting platform can separate the domestic garbage. Sort out the plastic bottles, old glass, waste cartons, old metals, textiles, etc.
The remaining material after manual sorting and processing directly enters the shredder. The shredder can shred all the garbage into uniform blocks, and the shredded garbage enters the trommel screening machine through the conveyor for screening. , sieve and separate the broken sand and fine inorganic materials, these materials can be treated as humus or landfill. The material on the sieve is sent to the air selection box through the conveyor for air selection treatment, and the organic and inorganic substances in the domestic waste are separated and classified.
Inorganic materials can be used to make non-burning bricks or raw materials for permeable bricks (which can also be landfilled). Organic matter can be sent to waste incineration plants to be incinerated for power generation, or it can be produced into biomass pellets for combustion fuel.